Product Brief Dual-Sensor Package Two Sensors in One SMD Packge The new SMD package (PG-TDSO) includes two independent sensors with separate power supply and separate signal outputs. Due to special mounting technology, Infineon is able to keep dual-sensor package size very small to enable compact PCB layouts and small magnet sizes. Features Infineon offers linear Hall sensors or angle sensors in the PG-TDSO package. The two sensors in one package offer Inherent redundancy. Sensor redundancy is of particular interest for new generation EPS steering systems with increased ISO 26262 requirements and other safety critical applications. All sensors are automotive qualified. Automotive qualified Two sensors in one package Separate power supply and signal output Temperature range from -40C to +125C Outstanding quality Linear Hall or angle sensor available Most products are also available as single-sensor solution with only one sensor. Single-sensor versions available 16-pin and 8-pin versions available Side View Top Die Sensing Element Leadframe Insulating Glue www.infineon.com/dual-sensor Bottom Die Product Brief Dual-Sensor Package Two Sensors in One SMD Packge Steering Angle EPS Motor Steering Torque Linear Hall Angle Sensors Linear Halls Product Interface Dual-/Single-Sensor Available Package Order Code TLE4997A8D Analog yes/yes PG-TDSO-8 SP000902760 TLE4998P8D PWM yes/yes PG-TDSO-8 SP000902776 TLE4998S8D SENT yes/yes PG-TDSO-8 SP000902784 TLE4998C8D SPC yes/yes PG-TDSO-8 SP000902768 Angle Sensors Product Interface Technology Description Package Order Code TLE5309D Analog sin/cos GMR and AMR Dual-Sensor 3.3V with temperature compensation PG-TDSO-16 SP001191262 TLE5309D Analog sin/cos GMR and AMR Dual-Sensor 5.0V with temperature compensation PG-TDSO-16 SP001191266 TLE5012BD E1200 IIF Standard, 360 angle GMR Dual-Sensor 3.3/5.0V with temperature compensation PG-TDSO-16 SP001205296 TLE5012BD E9200 SPC, 360 angle GMR Dual-Sensor 3.3/5.0V with temperature compensation PG-TDSO-16 SP001205300 Published by Infineon Technologies AG 85579 Neubiberg, Germany (c) 2014 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number: B142-H9909-X-X-7600 Date: 05 / 2014 Attention please! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/ or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.